Electromagnetic force suction cup use precautions
1. Pay attention to the balance of electromagnetic force suction cups. The electromagnetic suction cup should be placed above the center of gravity of the product used, and then energized to prevent the splashing of iron chips, causing unnecessary trouble;
2, electromagnetic strength suction cup lifting process, pay attention to safety, it is strictly prohibited to prohibit electromagnetic strength suction cup equipment in the head of the staff through, if necessary, please wear a safety hat!
4, when the electromagnetic force suction cup lifting, the working current should reach the rated value to start lifting, to ensure the normal use of the electromagnetic force suction cup, into the electromagnetic force suction cup the best working state;
5, to carefully check the parts of the electromagnetic strength suction cup, find damage should be replaced in time.
6, in the use of electromagnetic strength suction cup lifting, it should be noted that there should be no non-conductive magnetic items between metal products and electromagnetic suction cup. Such as wood chips, sand and stone. Otherwise, the lifting capacity will be affected.
How to maintain the electromagnetic sucker against corrosion Precautions How to maintain the electromagnetic sucker against corrosion?
No matter what the equipment, first of all, the quality of its electromagnetic chuck we are required, in fact, more importantly, in the process of its work, we have to do a good job of maintenance work;
If the maintenance is not proper, the electromagnetic chuck will greatly shorten the life, but also affect our daily production work, we have the same reason.
So how to effectively prevent the damage of our electromagnetic sucker?
We all know that the working environment of our electromagnetic sucker is generally an outdoor relatively empty field, since it is outdoor, then the wind and rain, will it lead to the corrosion of our electromagnetic sucker?
How to prevent corrosion maintenance of electromagnetic chuck
Didn’t you say the material was rust-proof? But we have to know that no matter what equipment, if there is a welding mouth, or the existence of fasteners such as screws, for a long time in the wind and rain, more or less will let our electromagnetic suction disc corrosion phenomenon, in fact, corrosion phenomenon is inevitable, a not very appropriate example: If our body is a little uncomfortable, but it does not affect our daily life and work, at this time if you can go to the hospital in time for examination, active investigation and treatment, soon our body will be completely recovered, if you have been ignoring this problem, it may eventually lead to incurable disease.
How to pay attention to the anti-corrosion maintenance diagram of the electromagnetic chuck
In order to make our electromagnetic suction cups less vulnerable to corrosion, daily standard operation and maintenance is a must;
Secondly, we have to start from our electromagnetic chuck manufacturers, we all know that our electromagnetic chuck is generally composed of chassis, iron core, coil and panel and junction box, in order to its corrosion resistance, we have to work hard on the choice of raw materials, and increase the waterproof coating in the interior of the chassis.
