★ The vacuum suction cup product does not need to be equipped with vacuum pump, just connect the conventional air compressor air source can quickly and strongly adsorb any material sheet (workpiece), such as stainless steel, acrylic, aluminum, copper, silicone plate, graphite, rubber plate, wood, glass, etc., iron plate steel can also reach a good adsorption effect!

★ Cutting fluid, cutting oil dust and other liquids or fine debris, the body can be discharged without affecting the use.

★ Depending on the size of the operation, the adsorption scale can be adjusted at will, quick operation, quick start, practical.

Figure: Suction cup manufacturer’s product display

★ This product cites European advanced skills, can reach five sides at the same time clamping processing, strong adsorption force.

★ Improve again under the premise of the original skills, even if the product has a through hole or needs to be processed through the hole (need to plan the tooling, can be planned for the customer, can also provide solutions to complete the tooling processing), to reach the tooling adsorption processing requirements of special workpieces, deal with the bottleneck that the conventional vacuum sucker can not process the through hole!

Standard vacuum suction cup use skills suggestions：

Processing products scale milling workpiece is not less than 100*100, grinding workpiece is not less than 50*50 (can be made non-standard tooling to complete a smaller adsorption scale)! The air supply should be as clean and dry as possible, and the product should be cleaned from time to time (the return frequency depends on the actual use time).

Figure: cnc Huai Gong electromagnetic vacuum sucker

Copper plate vacuum sucker Cleaning method of vacuum sucker：
Pour the clean fire oil or cutting liquid into the keyway of the suction tray, turn on the switch to make it in the working state, inhale the fire oil or cutting liquid into the tray through the suction hole of the countertop, continue the above action several times, and then let the clean liquid sucked by the suction tray out of the body! (When the temperature is low, the above operation can be carried out with warm water first).