Vacuum suction cups for panel fixing detail paper:
1, vacuum suction cup in LCD panel and other panels suction fixed use;

2, in order to prevent suction marks, the workpiece contact panel uses PTFE;

3. The organ mechanism follows the bending of the workpiece;

Vacuum sucker principle Detail paper expansion: clean vacuum sucker

The suction cups of rubber material, which inhibit the occurrence of suction marks of the workpiece, are halogenated on the special NBR, so that the movement of the workpiece with oil content is suppressed to a minimum.

Clean vacuum sucker Uses:
1. Absorption engineering of semiconductor and FPD related devices;

2. Suction handling of flat glass;

After the use of vacuum suction cups in practice, the following precautions are proposed for the use of vacuum suction cups:
① If it is found that the suction cup begins to age and other reasons for this loss of adsorption force. For safety reasons, a new sucker should be replaced in time.

② When the vacuum suction cup holds and moves valuables, it is prohibited to overload 40% of the gravity of the theoretical holding force to avoid excessive weight and the formation of valuables falling.

③ During the use of vacuum suction cups, it is necessary to adhere to the stability of vacuum pressure as a prerequisite.