Product Information
Home>News >Product Information
Manufacturer technology share: permanent magnet chuck structure principle
Time: 2023-10-15 Visit: 824 Type size

As a domestic manufacturer of permanent magnet cups, Huaigong Electromagnetic has a high reputation in the brand of permanent magnet cups, has its own technology development team in the research and development ability of permanent magnet cups, and has many electric permanent magnet cups technology patents, strength to create value!

 

Scope of use of permanent magnet chuck:

 

The common standard permanent magnet chuck produced by Huigong Permanent magnet Chuck manufacturer is suitable for surface grinding machine, spark machine, wire cutting machine.

 

Permanent magnet Chuck Manufacturer Product advantages:

 

When magnetizing and demagnetizing, the precision of the work surface can not change, and the work panel is treated by special technology, no leakage, which can prevent the corrosion of cutting fluid. In this way, it can extend the service life of the disk, can be placed in the cutting fluid for a long time, and the permanent magnet cup can be used vertically on the wire cutting machine, and the suction can reach 100N/cm².

 

Permanent magnet chuck structure principle:

 

The permanent magnet sucker consists of a magnetic core, a sucker and a boom. Among them, the magnetic core of the sucker is composed of a permanent magnet iron bar and a magnetic insulation material bar. The left and right two V-shaped magnetic core push blocks are consolidated on the upper plane. The sucker consists of steel bars and lead bars, and is welded with the shell as one.

 

 

Working principle of permanent magnet chuck:

 

The permanent magnet sucker is designed using the continuity principle of magnetic flux and the superposition principle of magnetic field. The magnetic circuit of the permanent magnet sucker is designed into multiple magnetic systems. Through the relative motion of the magnetic systems, the magnetic field intensity on the working magnetic pole surface can be added or eliminated, so as to achieve the purpose of holding and unloading.

 

Through the relative movement of the magnetic core of the sucker and the sucker, the magnetic circuit is alternately in two working states: open (suction) and short (discharge).

 

 

When the magnetic line of force comes out of the N pole of the magnet, through the yoke, through the ferromagnetic workpiece, and back to the yoke into the S pole of the magnet. In this way, the workpiece can be firmly sucked on the working pole surface of the permanent magnet chuck.

 

When the magnetic force line is less than the working pole surface of the permanent magnet chuck, the closed circuit of the magnetic circuit is formed inside the permanent magnet chuck, and almost no magnetic force line comes out from the working pole surface of the permanent magnet chuck, so the workpiece will not produce suction, and it can be successfully unloaded.

 

Everyone environmental protection, green energy saving, good products can not only save the production cost of enterprises can also effectively improve the quality of product production efficiency, reduce the cost of enterprises, to achieve the quality of industrial Internet flight. The above is the knowledge of permanent magnet suction cup structure principle shared by Huaigong permanent magnet suction cup manufacturer. If you have any comments or suggestions on our factory, please call for consultation and feedback!

+86-400-000-3835